| LOCATION/CONTACT | EQUIPMENT |
|---|---|
Rochester George Ostendorf 716-823-3788 |
1988 Liebherr 912 LD Crane with Orange Reel Grapple 15, 100 hours |
Rochester George Ostendorf 716-823-3788 |
1987 FMC Vanguard Sweeper Flat Tire, p/u Belt doesn't work and water system needs minor repair |
Rochester George Ostendorf 716-823-3788 |
TT14 1972 Dump Trailer Trail Mobile |
Rochester George Ostendorf 716-823-3788 |
TT110 91 Ford Tractor Had a fire - all electrical is bad. The motor is rebuilt, though! |
Lake Erie George Ostendorf 716-823-3788 |
Hobart Meg-ark 500 230/460V AC |
Lake Erie George Ostendorf 716-823-3788 |
Lincoln Welder 230V AC (deal Arc) |
Lake Erie George Ostendorf 716-823-3788 |
Johnson Sweeper (road) |
Lake Erie George Ostendorf 716-823-3788 |
75 International w/fifth wheel |
Lake Erie George Ostendorf 716-823-3788 |
Hough Loader (1951) |
Lake Erie George Ostendorf 716-823-3788 |
Gensco Stripper (single cable feed) 230V |
Lake Erie George Ostendorf 716-823-3788 |
Max 100 Hypertherm 230V AC |
Lake Erie George Ostendorf 716-823-3788 |
Plasma Cutter Pack ten xr |
Lake Erie George Ostendorf 716-823-3788 |
Rigby single Wire & Cable Stripper |
Lake Erie George Ostendorf 716-823-3788 |
Barrel Dumper (Tubar) Cap1000# |
Lake Erie George Ostendorf 716-823-3788 |
Factory Cat Sweeper 48" |
Lake Erie George Ostendorf 716-823-3788 |
Mosley Cutter Hydraulic 230V |
Rochester George Ostendorf 716-823-3788 |
6 Barrel Carts (2 Wheel) |
Lake Erie George Ostendorf 716-823-3788 |
HKP Power Units w/hand held cutter (ins. wire) |
Lake Erie George Ostendorf 716-823-3788 |
2 Johnson Brickers |
Lake Erie George Ostendorf 716-823-3788 |
Lollini Bricker/Press 1 - Indoors, Green - 40HP/HYD/220/440 volts system 1 - Outdoors, Red - Detroit Engine Diesel |
Lake Erie George Ostendorf 716-823-3788 |
1 Alli-Chalmers Forklift (yellow) Capacity 5,000 lbs. Model #ACC-50-PS, S/N #17312356, |
Lake Erie George Ostendorf 716-823-3788 |
1 - Clark Forklift (green) Model #CFY40BLPG S/N CFY40B-31-880-LPG, 4000 lbs. Capacity |
Lake Erie George Ostendorf 716-823-3788 |
1 - Giant Vac, 8HP (red) |
Lake Erie George Ostendorf 716-823-3788 |
1 - LaBounty MSD 3R Mobile Shear, Year 1995 (attach to Backhoe) |
Lake Erie George Ostendorf 716-823-3788 |
2 - H.K. Porter (Hand Cutter/Shears) 5HP/HYD/230V-60Hz-3Ø, Model #T5205, S/N #9457/9458 |
Lake Erie George Ostendorf 716-823-3788 |
1 - Hobart Welder, Model - Champion 16 Air Cooled Gas Drive Welder, Spec # SP7116-001 S/N # 494WR05125 |
Lake Erie George Ostendorf 716-823-3788 |
1 - Gensco Equipment Wire Stripper, 220 Volt, Stock #2585, Model #CS201 |
Lake Erie George Ostendorf 716-823-3788 |
1 - Wire/Cable Stripper (Blue) |
Lake Erie George Ostendorf 716-823-3788 |
1 - Hyperthem-Max 100 Plasma Cutting System, 3PH, 60 Hz, Stock #059025, S/N 70-799 |
Lake Erie George Ostendorf 716-823-3788 |
1 - Thermal Dynamics - Melin Pak 15xC, Plasma Cutting System |
Lake Erie George Ostendorf 716-823-3788 |
1 - Thermal Dynamics - Stak Pak, PCH/m-70, Smart Torch, 1/3 PH & 50/60Hz, Model # PM6042, S/N E50615A185110E |
Lake Erie George Ostendorf 716-823-3788 |
1 - Thermal Dynamics Thermal ARC, PAKIOXR, Plasma Cutting System (out of service, need parts) |
Lake Erie George Ostendorf 716-823-3788 |
2 - Thermal ARC, PAK10 Cutting System (out of service/only good for parts) |
Buffalo Hauling Corp. Jim Bucki 716-583-2720 |
MSD 50 LaBounty Shear with a broken bottom jaw. Have $4,000 in new hoses and parts. |
Buffalo Hauling Corp. Jim Bucki 716-583-2720 |
E-120 Cat Excavator w/bucket. Runs Great C-11 |
Buffalo Hauling Corp. Jim Bucki 716-583-2720 |
Akerman Blown Motor MG - set removed and missing an arm cylinder (sent to Rochester) |
Buffalo Hauling Corp. Jim Bucki 716-583-2720 |
Orange Peel Grapple used with Akerman |
Buffalo Hauling Corp. Jim Bucki 716-583-2720 |
Ford Back Hoe - in LERC BHC/Shop |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Do All Saw - M/N- 2624-4 - S/N 208-67139, 7.5 H.P., 1165 RPM, 3/phase 230/460 Volts |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Southwestern Wire Cloth - Vibriator, Unit No. 1002 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
2 Sweco-Vibriators, M/N-US48C686, 2.5 HP-1200 RPM |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Wysong and Miles - Shear A-36 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Wysong and Miles - Roll Former #836 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Le Roi-compressor, National Bldg. #1061211, 200 PSI-184 HD, 25 HP-1760 RPM, 3-Phase-200 PWS |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Gosset-Compressor, 200 PSI, 10 HP-1745 RPM, 236/460 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Peabody-Winder |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Air Feed, 18 Cap, M/N-r-00, S/N-841216 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Warner-Feed, Electric Brake-F.J. Littell, 40-18-Reel-400 lbs., S/N-68334-61-16"-20" |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Sesco-Reel Turner, M/N-55-543, S/N 19542-1 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Twin Shell Dry Blender, Cap. 5 CU Ft., 418 lbs, 2HP, S/N 260101 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
2 Hendrick-Rail Saws with 10' Travel, S/N 20134 & 11681 |
Mayco-Granite City Harry Schlekke 618-451-4400 |
2 Roll Formers, 1with 11 heads and 1 with 12 heads. Also with decoiler & Cut off saw |
Mayco-Granite City Harry Schlekke 618-451-4400 |
2 Hydron Cold Presses 2 Hydron Hot Presses |
Mayco-Granite City Harry Schlekke 618-451-4400 |
1 Conveyor-Hytrol, 10' Long with 24 " Wide Belt; 2 Conveyors 14' Long with 12" Wide Belt 2 Conveyors 12' Long with 24 " Wide Belt 3 Conveyors 22' Long with 12" Wide Belt |
